E Exploits

Comprehensive Guide on Ncrack – A Brute Forcing Tool

In this article we will be exploring the topic of network authentication using Ncrack. Security professionals depends on Ncrack while auditing their clients. The tools is very simple, yet robust in what it offers a penetration tester. It was design to help the companies in securing their networks by analysis all their hosts and networking devices for weak passwords.

Table of Content

Introduction to Ncrack

  • Exploring Modules

Authentication Phase

  • Basic Attack
  • Dictionary Attack
  • Brute Force Attack
  • Pairwise Attack

Misc Phase

  • Resume the Attack
  • Stop on Success
  • Obtain Result in List Format

Output Format

  • Normal text File
  • All Format At Once
  • Append output
  • Nsock Trace

Timing and Performance

  • Timing Templates
  • Service-Specific Options

Target Specification

  • Input from Nmap’s XML
  • Input from Text file
  • Exclude Host from List 

Introduction to Ncrack

Ncrack is a network authentication tool, it helps pentesters find out how vulnerable the credentials protecting a network’s access are. The tool is a part of the Kali Linux arsenal and comes preinstalled with the package. It also has a unique feature to attack multiple targets at once, which is not seen very often in such tools.

Ncrack can be started by typing “ncrack” in the terminal. This shows us all the different options the tool provides us.


syntax: ncrack [Options] {target:service specification/port number}


Exploring Modules

Ncrack is a very versatile tool, it has modules to test most of the popular forms of network authentication. We can see this by checking the modules.

ncrack –V


Authentication Phase

Basic Attack

We have define this attack as basic because at this phase we only know that port 21 is enable for FTP service on victim’s machine. So with the help of the following command we will try to find out possible FTP login credential.


On executing above command it will try to crack password for anonymous login account as shown in the given below image.


 Dictionary Attack

Suppose you are willing to obtain correct login credential for any account such FTP, SSH or HTTP when you having following situations:

 Situation1- Know only username but don’t know the password

Situation2- Don’t know username but know the password

Situation3- Neither have username nor the password

In such situation, you should use a wordlist dictionary and then go with ncrack command respectively:

ncrack -user msfadmin -P pass.txt
ncrack -U user.txt -pass msfadmin
ncrack -U user.txt -P pass.txt


Brute Force Attack

Now whenever you consider yourself in following situations:

Suitation1- Close assumption of few usernames and passwords for any host:service and don’t want to use dictionary then you can go with following command, this will reduce our effort of guessing truthful credential.

ncrack -user msfadmin,ignite -pass msfadmin,123

Suitation2- Close assumption of usernames and passwords but there multiple hosts in a network and guessing valid login for destination machine is much time taken process.

Again with the help of ncrack following command you will be able to crack valid login for any host present in the network.

ncrack -user msfadmin,ignite -pass msfadmin,123


Pairwise Attack

Ncarck lets us choose sets of credentials, basically pairing them in row and column index which mean 1st username from user.txt file will pair with 1st password of pass.txt file.

If you are not giving any dictionary, then ncrack will go with its default dictionary for pairing password for anonymous login.

ncrack -v --pairwise

From the given below image you can observe that we had made successful FTP login with the help of paired password matthew.


Misc Phase

Resume the Attack

This is probably the feature that takes the cake. We all know how frustrating the loss of connection or any other technical interruption can be during testing, this is where Ncrack is blessing. If your attack gets interrupted, you can pick it right up from where you were.

ncrack --resume /root/.ncrack/restore.2018-12-05_04-36


Stop on Success

As you have seen in above attack that it keep on cracking the service until it finds the all possible logins but if you want that, the attack should quit cracking service after finding one credential then you should add -f option in the ncrack command.

ncrack -v --pairwise -f


Obtain Result in List Format

It always matter that how will you maintain your penetration testing report and output result while presenting them. Sometime it is quite hectic to arrange the result in well polish look especially at that time when you have to penetrate multiple host machine. To shoot such hotchpotch, the ncrack has added -sL option which will generate result in a list format.

ncrack ssh:// ssh:// -sL


Output Format

Normal text File

If you want to store the output of ncrack result in a Text/XML format.

Then you can go with -oN option to save the result in a text file with the help of given below command and later can use cat command to read the information saved inside that file.

ncrack -U user.txt -P pass.txt -oN normal.txt
cat normal.txt

Or you can switch to –oX option to save the output result in XML format.

ncrack -U user.txt -P pass.txt -oX save.xml


 All Format At Once

Suppose you want to store the output of ncrack result in both format (.txt, .xml) then you can choose -oA option while executing command.

ncrack -U user.txt -P pass.txt -oA output

As you can observe that it has stored the result in two format as “output.ncrack” and “output.xml”.


Append output

If the testing is being done in iterations, Ncrack gives us the option to append or add the output to an existing file with ease.

As you can observe that when we try to crack ftp service for host:, it gives ignite:123 as login credential that I had save in a text file.

ncrack -U user.txt -P pass.txt -oN normal.txt

But on crack SMB service for host:, it gives msfadmin:msfadmin as login credential and here I had append the output in previous text file.

ncrack -U user.txt -P pass.txt -oN normal.txt --append-output

Conclusion: so by reading normal.txt file we got both output result at one place rather than clobber specified output files.


Nsock Trace

Ncarck lets us run nsock trace on our target while attacking it, we can set the trace level anywhere from 0 to 10 depending on our objective. The output from this operation is quite large.

ncrack -U user.txt -P pass.txt --nsock-trace 2


We weren’t kidding when we said the output is large!

Timing and Performance

Timing Templates

Timing template in ncrack is defined by –T<0-5> having -T0 as the slowest and –T5 as the fastest. By default all ncrack scans run on –T3 timing template. Timing template in Ncrack is used to optimize and improve the quality and performance of scan to get desired results.

T5: Insane Scan

T4: Aggressive Scan

T3: Normal Scan

T2: Polite Scan

T1: Sneaky Scan


ncrack -U user.txt -P pass.txt -T1

As you can observe from the given below image that it took 187.57 seconds and for this reason T0 and T1 is use to evade from firewall and IDS/IPS.

ncrack -U user.txt -P pass.txt -T5
ncrack -U user.txt -P pass.txt

On executing above command you can comparing the time of completing the process in both result, it took 15.01 seconds during T5 and 24.00 second during default (T3).

Service-Specific Options

cl (min connection limit): minimum number of concurrent parallel connections

CL (max connection limit): maximum number of concurrent parallel connections

at (authentication tries): authentication attempts per connection

cd (connection delay): delay <time> between each connection initiation

cr (connection retries): caps number of service connection attempts

to (time-out): maximum cracking <time> for service, regardless of success so far

You can use above option while penetrating whole network for cracking any service.

ncrack ssh:// -m ftp:cl=10,CL=30,at=5,cd=2ms,cr=10,to=2ms -sL -d


Target Specification

Input from Nmap’s XML

You might be aware of Nmap tool its functionality, suppose while scanning network with the help of nmap you have stored its result in xml format then you can use ncrack -iX option to crack the running services with the help of xml file format.

ncrack -u ignite -pass 123 -iX nmap.xml

As you can observe from the given image that ncrack itself, cracked the password for FTP without specifying any service or port in the command.


Input from Text file

Executing command again and again on multiple host is quite time consuming efforts, therefore, you can place all host IP in a text file and then use it for cracking any particular service.

ncrack -U user.txt -P pass.txt -iL host.txt -p21


Exclude Host from List

Suppose you are using a list that contains multiple IP or range of IP and you don’t want to crack service for a specific IP then you can use –exclude option to eliminate that particular IP from list of hosts.

ncrack -U user.txt -P pass.txt -iL host.txt -p21 --exclude

As you can observe, this time it does not crack for and shown the result for the remaining IP.


Author: Shubham Sharma is a Cyber security enthusiast and Researcher in the field of WebApp Penetration testing. Contachere

The post Comprehensive Guide on Ncrack – A Brute Forcing Tool appeared first on Hacking Articles.

Read more